XREF & Block
Applies to :ZWCAD+ 2015
1) EATTEXT ( automatically generate report file)
2) BLOCKSUM. You can also go to the entry from express tool: ...
Wed, 3 Feb, 2016 at 10:22 AM
Applies to : ZWCAD Classic; ZWCAD+ 2015
Full path insert: Inserted x-ref could still be recognized when just changing the drawing itself. ...
Mon, 16 Nov, 2015 at 5:30 PM
Applies to : ZWCAD Classic; ZWCAD+ 2015
The system variable “XREFNOTIFY” would allow you to control:
0 Disables x-ref notification.
...
Wed, 3 Feb, 2016 at 10:31 AM
Applies to :ZWCAD+ 2015
When the name of blocks in current drawing are the same as that in tool palettes, in AutoCAD, we could right click th...
Wed, 3 Feb, 2016 at 10:31 AM
Applies to : ZWCAD Classic; ZWCAD+ 2015
The x-ref is not allowed to be resolved (exploded). But if you want resolve this drawing, you could c...
Wed, 3 Feb, 2016 at 10:32 AM
Applies to : ZWCAD Classic; ZWCAD+ 2015
When finishing the definition of block, sometimes you need to rename this block. You could rename by ...
Wed, 3 Feb, 2016 at 10:33 AM
Applies to : ZWCAD Classic; ZWCAD+ 2015
In the X-ref Manager, we could identify the type of xref in the dialog box as it’s shown as below.
...
Wed, 3 Feb, 2016 at 10:34 AM
Applies to: ZWCAD Classic; ZWCAD+ 2015
It is controlled by a system variable “EXPLMODE”. “EXPLMODE” is used to control that if “EXPLODE” supp...
Wed, 3 Feb, 2016 at 10:36 AM
Applies to: ZWCAD 2017; Classic; 2015
Because when create block, there will be a name for this block, and when you copy the block and paste it, the ...
Sun, 1 Mar, 2020 at 1:59 PM